Biker Forums - Motorcycle Enthusiast Forum

Biker Forums - Motorcycle Enthusiast Forum (https://bikerforums.org/)
-   Street Motorcycles and Parts (https://bikerforums.org/street-motorcycles-parts-6/)
-   -   Bike is pinging (https://bikerforums.org/street-motorcycles-parts-6/bike-pinging-818/)

meanolfart 03-20-2004 09:16 PM

Bike is pinging
 
I have a 02 Kawi Mean Streak 1500 FI
lately the bike has started to ping when
I accel between 2500 and 3K.
I use 93 oct fuel and the bike is Stock
I was thinking of switching to NGK Iridiam plugs, but the
only application avaialble is at 1 cooler heat range from
the stock plug.
Need some advise on switching to this plug.
Thanks,
MOF

FatBoyRider 03-21-2004 05:26 AM

You said the bike is stock, but have you made any modifications to the bike....exhaust, intake or anything else. Is the bike carb, or EFI ?

Need more info to help you....but first thought is your running lean, and need more fuel.

FBR :cool:

meanolfart 03-21-2004 04:13 PM

Hey FatBoyRider:
The bike is completerly stock. No pipes, intake or fuel management.
The bike has a catalytic converter (can you believe that s..t)!
All Kawai's have what is called a Kleen system to cut down
emissions. They need it for thier Calf market, so they just build
the same system all over the country.
I believe the bike is running LEAN..
I am hoping that the NGK Iridiam plugs will promote a more
complete combustion and either eliminate or reduce the pinging.
The only thing is the plug application is 1 heat range cooler
than the stock NGK factory plug.
Any suggestions?
Ride Safe,
Meanolfart

FatBoyRider 03-22-2004 03:53 AM

A lot of the bigger V-twin Kawasaki's that have carbs use the same carb as a stock Harley-Davidson, and that is a Keihin CV (constant velocity) Carburetor. If the bike is indeed running lean, you can put bigger jets in the carb. Sounds to me you may just need a bigger main jet, if so that would be a simple fix. Of course if the bike is fuel injected, forget all that, you will need a "re-flash" for the EFI module.
If it's a carb and you need to re-jet....follow the current thread titled "rejetting carb" that Mark started.....there are some pics I posted of a Keihin CV carb.....same applies for Kawasaki's with the CV 40mm carb......let us know what you figure out.

Also ,since your in Georgia and not California.....If I were you I would yank that emmisions shit off of the bike :D

FBR :cool:

meanolfart 03-22-2004 05:01 AM

pinging
 
FatBoyRider:

Later this year I am going to replace pipes, and add a Fuel monitor and thunder kit. I figure cost with labor at $1 grand.
that should help!
Thanks for your advise.
Ride Safe,
Meanolfart


All times are GMT -7. The time now is 08:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands