"wide ass swingarm kit(dyna)
 

Has anyone used the new zodiac wide ass swingarm kit to install a 250(18x8.5) wheel on a dyna? If so how was it. I just purchased the kitand I am ready to do the install.

Welcome to the boards. I don't know of anyone that has posted anything about that particular kit since I have been here, but I guess we'll find out. Thanks for signing into the boards. Keep us updated on your progress with pics. Never seen a Dyna with a 250 on it.

Welcome.....Like PB say's post some pics, I've seen lot's of Softails with wide kits, but not Dynas.

good luck with it....

FBR :cool:

Thanks for the welcome. I will keep you posted with my progress (It should be interesting) I'll post some pics as I work through it.

Pictures
 

I will have pics this week, still not done. This has been a bigger project than expected. I had to purchase a narrow belt kit and do some machine work but finally got the belt to clear the 250. I also had to offset rear wheel aprox. 5/8" and finally will have to make adjustments to the new fender struts.

Cool, looking forward to seeing the progress. Looks like you've been busy.

wide ass swingarm
 

here are a couple pics ......more coming

ya baby!!!! YAH! that looks hot.

Damn thats sweeet!

Welcome to the forums!

More pics.......thanks for response!

shit !!!
the tires on my car aren't that big
WOW!!!!!!!!!!!!
NIZE !!!!!!!!!!!!!

Before pics
 

Thought I should show a couple before pics.........

Good looking bike. Your progress seems to be going well. Looking forward to seeing completed bike. Good luck.

I'm not sure but believe you have to offset tranny and motor, tire must be centered :confused:

Big tire kit
 

Have you thought of just going chain drive?
Belts are to hold up your pants!!

Tried a chain with a 3/4" off set on front sprocket......didnt work! I have the wheel all on and spaced and ready to go with only a slight offset on rear wheel....shouldnt affect handling. I had to machine down my stock caliper bracket because of off set on rear wheel.......almost ready for test drive...!!!!

Any offset affects handling !!!!! At least that's what every reference I have says :eek:

I took my bike for a test ride today. I went about 20 miles (BBBBBBBRRRRRRRRRRRRR 21 degrees)
It handled excellent...no pulling to one side or anything. I let go of the bars at 45 mph and it tracked nice and straight.........all I have to do now is finish with my rear fender and give it a paint job and I'm ready to roll........ :cool:

21 degrees????...the steering bearings were probably frozen, that's why it tracked straight LOL!

Over 100 miles and no problems.......everything is running smooth.....

Here is picture with fender all mocked up and ready for body work and paint

That's sweet looking man. I bet you can't wait until the body and paint work is done.

so cool. makes me wonder why the Motor Company doesn't offer that as an option.

As usual plans change............. new fender pics

is that a lite under the fender, showing thru ???
or a glow in the dark thingy???
interesting

Very cool! How did you cut the letters in the fender? Looks like that was a bitch.

Tom, thats a light recessed in the fender with a piece of polished aluminum for a reflective backing plate........Junkyard I used a plasma cutter for the lettering.............wasnt bad cutting!!!

Ahhh, a plasma cutter. Very cool. That's one toy I would love to own!

The company I work for makes plasma cutters and water jet machines. Nice work by whatever you used for sure. I setup and run the CNC machines that make the plasma tips for some of our machines... hoping it was one of ours as I'm told we're the best in the business in Plasma!

Plasma cutters and saw-z-all two of mans greatests inventions.................