View Poll Results: Professional trained techs or Just hands on learned
Professionally trained
2
20.00%
Hands on learned
8
80.00%
Voters: 10. You may not vote on this poll
Motorcycle Techs?
07-03-2002, 03:35 AM
#1
Thread Starter
Join Date: Feb 2002
Location: Philadelphia, PA
Posts: 1,268
Motorcycle Techs?
As a debate that could go on and on....I'll open it up here. Who do you think are the best motorcycle techs. Those professionally trained or those with just tons of experience under their belt that just learned by doing?
Post your vote to the poll, then post a message to explain.
Post your vote to the poll, then post a message to explain.
07-03-2002, 08:12 AM
#2
Bikerforums Linebacker
Join Date: May 2002
Location: Fairfax, Iowa
Posts: 1,111
In my opinion most professionally trained techs work in a dealer shop, or something similar, where they don't get much "out of the ordinary" experience. People that tinker, and learn themselves, seem to get a little more radical, take more risks, and seem to offer more variety in horsepower making techniques. I say most as to not offend any techs in here.
my .02
PHAT-BOY
my .02
PHAT-BOY
07-03-2002, 10:06 AM
#3
Biker
Join Date: Mar 2002
Posts: 19
You'll find a Bro that has been working on his own ride or maybe some others ride will be more apt to go the extra mile when it comes to problems that he comes across. "Seat of the pants" in my opinion is the best learning experience. Book people seem to be fairly cut and dry.
07-17-2002, 08:35 AM
#4
SoberBiker
Join Date: Mar 2002
Location: Daytona Beach
Posts: 135
I have to agree with the self trained...but being a professionally trained...I have to go with that. I did a lot of tinkerin when I was messin with mine...but bein trained helped me with little things like electronics and many things inside the motor that I was too afraid to look into on my mill. Factory (or the equivilant) training is actually a better way to go in my opinion.
One other thing, did ya ever think that maybe that guy in his own shop that has been doin it for a few years, may be trained and out on his own after servin his "Apprenticeship"? I know a few of those guys and they are excellant wrenches. The one guy I use a lot, is actually factory trained not only with H-D but with Honda and Yamaha as well. Everybody has to get training somewhere ...be it by the seat of his pants or going to a certified school. At least in school, they get taught the way it should be as far as factory specs.
One other thing, did ya ever think that maybe that guy in his own shop that has been doin it for a few years, may be trained and out on his own after servin his "Apprenticeship"? I know a few of those guys and they are excellant wrenches. The one guy I use a lot, is actually factory trained not only with H-D but with Honda and Yamaha as well. Everybody has to get training somewhere ...be it by the seat of his pants or going to a certified school. At least in school, they get taught the way it should be as far as factory specs.
07-19-2002, 03:30 PM
#5
Moderator
Join Date: Mar 2002
Posts: 579
I'd rather have someone that's been "wrenching" on scooters for years under some oak tree , than some 90 day wonder from the H-D tech school.....no doubt about it....you can't buy experience..you can only live it , learn it & and earn it.
11-08-2002, 07:10 PM
#6
just push play
Join Date: Mar 2002
Location: bardwell,Tx.
Posts: 66
hey my subject!
ive been a paid mechanic since 12 yrs old (all be it was a lawn mower shop gotta start some where right) id take a veteran over cert more than not depending in years in the field. theres not much i havent worked on for a living including one airplane! ok i havent worked on a train yet i said YET!!but i always look for those with the gift! and i truly believe it is a gift! you either can do it all or not at all!!! REDNECK
________
buy easy vape
________
buy easy vape
Last edited by redneck; 01-18-2011 at 09:06 PM.
10-20-2004, 01:09 PM
#7
Biker
Join Date: Sep 2004
Location: Washington State, USA
Posts: 12
hmmmm
WELL, I've done a lot of stuff over my years. Mostly learned on my own, but every now and then I'll go take a class on it and I'll learn some trick or tip that I would have NEVER learned on my own. My vote is for LOTS of real world hands on experience with some classroom training for indepth stuff, tricks and tips.
